Wood stove, fireplace, chimney, heat exchanger, blower, fan. 100V power OK. Used only a few times.

Wood Stove Fireplace Chimney Heat Exchanger Chimney Blower Fan

Instruction manual (English) included.
Easy to install: simply connect it in the middle of your chimney and plug it into a power outlet.

The blower automatically activates when the temperature rises.

The airflow is significantly stronger than typical stove fans that don't require power.
It's also efficient as it directly extracts heat from the chimney.
No smoke will escape from the chimney.

It works fine with standard household power.
A 3-pin conversion plug (a few hundred yen) is required.

The chimney connection diameter is 6 inches (15.24mm), but
I was able to install it without issues using a 150mm diameter chimney and connection adapter, which are readily available at home improvement stores and general retailers.

Used a few times with a wood stove that I installed myself in March of this year.
No screw holes were drilled into the main unit during installation.
There is some soot residue inside, but the exterior is clean.

Purchased on Amazon and shipped from the US.
ーーーー Purchase page ーーーー
https://www.amazon.co.jp/dp/B003B6GLNA?ref_=ppx_hzod_title_dt_b_fed_asin_title_0_0


The chimney, connection adapter, thermometer, etc. shown in the images are not included.
Only the main unit is included.
The thermometer shown in the images is not included.