Stainless steel parts for 20cm cube aquarium

This is a stainless steel part specifically for 20-cube aquariums.

The first image is a sample image after setup.

Image 2 shows the contents of the set:
Lower base, upper cover, 2 rear feet for the upper cover (with double-sided tape), iron plate for magnet, bracket for GEX Flatty.
Both the lower base and upper cover are 3cm in height.

First, attach the feet to the rear of the upper cover in your desired position as shown in image 3, then use your preferred light. The double-sided tape attached to the feet is 1mm. If you wish to reposition them after installation, please use 1mm tape (the height will not match the front feet).

The sample aquarium used is a Kotobuki Kougei 20-cube.

The surface is protected with masking, but the back side (see last image) is unfinished and may have scratches or dirt from processing. However, the back side is mostly not visible.
We will wipe it down with alcohol spray before shipping. Please understand that metal parts such as the iron plate for the magnet may have minor scratches from processing.

It will not shift during normal daily use, but if you are concerned, please take measures such as using non-slip tape from a 100-yen shop.
Burrs have been removed, and the corners have been rounded to prevent injury, but this is not 100% perfect, so please be careful when handling.

Thank you.