Coin Ring Making Kit Punch and Die Set Hole Diameters 10 12 14 16

Name:
Punch and Die Set

Materials:
Body: S45C
Cutter: S45C
Cutter Holder: S45C

Applications:
Punch and die set for thin round plates with a thickness of 3mm or less, from φ22mm to φ40mm.
Used for center punching when creating coin rings and for punching holes in round plates from φ22mm to φ40mm.

Mechanism:
This is a jig for center punching that utilizes the fact that the distance from the outer circumference to the center is the same.
The disc size allows for centering of pieces up to 3mm thick, from φ22mm to φ40mm.
Compatible Metals:
- Brass
- Copper
- Aluminum
- Silver
- Soft metals

Contents:
- Punch and Die Set Body
- Hole Diameter: Standard φ10mm Punch and Die Cutter

Optional Additions:
- Hole Diameter: φ10mm Punch and Die Cutter [Standard Equipment]
- Hole Diameter: φ11mm Punch and Die Cutter Add-on
- Hole Diameter: φ12mm Punch and Die Cutter Add-on
- Hole Diameter: φ13mm Punch and Die Cutter Add-on
- Hole Diameter: φ14mm Punch and Die Cutter Add-on
- Hole Diameter: φ15mm Punch and Die Cutter Add-on
- Hole Diameter: φ16mm Punch and Die Cutter Add-on
- Hole Diameter: φ11, 12, 13mm Cutter Add-on
- Hole Diameter: φ14, 15, 16mm Cutter Add-on
- Hole Diameter: φ12, 14, 16mm Cutter Add-on

The mechanism is explained in the video below:
https://www.youtube.com/watch?v=vjepH7sZ0zw

Examples of work are shown in the video below:
https://www.youtube.com/watch?v=MqPbfWRfUvU&t=310s

If you wish to see it in a video,
detailed videos on how to make coin rings are uploaded on Youtube.
Please watch them if you want to see the mechanism in detail or how to use it before purchasing.

*This product comes with only the φ10mm hole punching cutter as the standard cutter.
If you require other cutters, please add them as options.

*When using a hammer or similar tools, please protect your eyes with safety goggles.
*When using a press machine, do not apply excessive force. There is a risk of damage.